.jpg&width=640&format=webp)
.jpg&width=640&format=webp)
.jpg&width=640&format=webp)
Horsepower & Torque: OEM
Cylinder Heads: Iron
Compression Ratio: OEM
Camshaft: Hydraulic Roller - .278 Intake / .278 Exhaust Lift and 210 Intake / 211 Exhaust Duration @ .050-115LSA
Pistons: Cast Aluminum
Crankshaft: Cast Crank - 3.000" Stroke and 5.090" Rods
Fuel Recommendation: 87+ Octane
- Description
- Engine Specs
- Parts & Accessories
- Warranty
Overview:
Block:
- BluePrint Engine High Strength Cast Iron Block
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
Rotating Assembly:
- Cast Crankshaft
- Ford, Machined and Balanced by BluePrint Engines
- 3.000" Stroke
- OEM Type 5.090" Connecting Rods
- OEM Spec Pistons
- 50 oz Externally Balanced Front and Rear
Cylinder Heads:
- Iron Heads
Cam Specs:
- Hydraulic Roller
- OEM Spec Per Listed Vehicles
- Firing Order: 1-3-7-2-6-5-4-8
Ignition Timing:
- OEM Specifications
Also Includes:
- BluePrint Logo'd Valve Covers - BPP9237
Notes:
- Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
- Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
- MUST see attached application list above for fitment.
Blocks
- BluePrint Engine High Strength Cast Iron Block
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
Cylinder Heads
Cast Iron Cylinder Heads
Ignition Timing
Controlled by OEM ECU
Spark Plug
.054 in.
Firing Order
1,3,7,2,6,5,4,8
Rotating Assembly
- Cast Crankshaft
- Ford, Machined and Balanced by BluePrint Engines
- 3.000" Stroke
- OEM Type 5.090" Connecting Rods
- OEM Spec Pistons
- 50 oz Externally Balanced Front and Rear
Cam Specs
- Hydraulic Roller
- OEM Spec Per Listed Vehicles
- Firing Order: 1-3-7-2-6-5-4-8
Stall Converter
OEM
Also Includes
- BluePrint Logo'd Valve Covers - BPP9237
Notes
- Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
- Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
- MUST see attached application list above for fitment.
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Parts & Accessories Specs
| Intake Manifold (Not Included) | N/A - Reuse OEM |
|---|---|
| Spark Plug (Not Included) | ACDELCO-CR43TS |
| Harmonic Balancer (Not Included) | BPP50 |
| Flexplate/Flywheel (Not Included) | BPP529618 - BPPF28164 - BPPF157T28 |
| Fuel Recommendation | 87+ Octane |
| Recommended Service Oil | BPP10W30 |
| Recommended Oil Filter | BPP21085 - BPP51515 |
| Total Oil Capacity with Production Oil Pan, and Correct Filter | 5 Quarts |
Header Partners:
- Click Here for our Header Partners and recommendations.
Better Than the Rest.
The satisfaction of our customers is our highest priority at BluePrint Engines. Every engine we build is assembled with premium components, balanced to within two grams, and dyno-tested to verify real horsepower and torque before it leaves our facility.
All BluePrint products include warranty protection designed specifically for how they're used. Our complete crate engines carry our industry-leading 30-month / 50,000-mile warranty, offering the confidence and peace of mind serious builders expect. Other BluePrint products—including bare blocks, marine engines, transmissions, race applications, and cylinder heads—feature warranty coverage tailored to their intended use and operating conditions.
For full terms and specific coverage by product category, download our warranty guide below. It contains complete details, limitations, and instructions for warranty registration and claims.
Already Own this engine?
Protect your investment by registering your warranty today. Register below to ensure coverage and stay up to date on important service information.
Register NowEVERY BLUEPRINT ENGINE ACES THE DYNO TEST
We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer in our in-house dyno testing rooms to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That’s precisely why our engines sound and run better than our competitors.
All specs, zero speculation: A comprehensive, dyno-generated printout showing your critical engine specs will accompany your delivered engine — every time. No more guessing or wondering what your installed engine’s real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash ‘em your exact engine’s dyno results.